DU1207MCF

The DU1207M Series is an integrated CMOS camera with a USB 5Gbps (USB3.1 Gen1) interface. For video output and camera control, the USB 5Gbps interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment. This product is a 3 year warranty correspondence.

Category: Tag: Brand:

Description

Key Features

  • Featuring Teli original IP “Teli Core Technology”
  • High frame rate
  • Global shutter
  • Adjustment by high-quality and high reliability productive facilities
  • USB 5Gbps (USB3.1 Gen1) interface
  • USB3 Vision Ver.1.0 conformity
  • GenICam conformity Ver.2.3 / Ver.3.0
  • IIDC2 Digital Camera Control Specification Ver.1.1.0
  • e-CON Connector adoption
  • Scalable
  • Color processing (DU1207MCG / DU1207MCF)
  • Square grid arrangement
  • Random Trigger Shutter

Downloads

https://www.toshiba-teli.co.jp/pdf/catalog-en/usb3_cameracatalog_en.pdf
https://www.toshiba-teli.co.jp/pdf/industrial-camera-en/op-du1207m_e.pdf
https://www.toshiba-teli.co.jp/pdf/catalog-en/fl_du_ddu_en.pdf
https://www.toshiba-teli.co.jp/pdf/industrial-camera-en/du1207m_e.pdf

Additional information

Exposure time

MANUAL: 30μs to 16s AE: 30μs to 16s Random Trigger Shutter: 30μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)

Frame rate

31fps (Bayer 8bit)

Gain

MANUAL: 0 to +24dB, AGC: 0 to +24dB

Image buffer

256MB / 21 frames (all pixels readout)

Interface

USB3 Camera (High performance)

Lens mount

C-mount

Mass

approx. 90g

Pixel size

3.45μm x 3.45μm

Power consumption

4.5W max.

Power supply

DC5V ±5%

Resolution

4,096(H) x 3,000(V)

Sensitivity

1,425 lx (F5.6, 1/31s)

White balance

Manual white-balance / One-push white-balance

Aspect ratio

4:03

Black level

-25% to +25%

Color type

Color Camera

Conformity

CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2

Du1207m series

30μs – 16s

Electronic shutter method

MANUAL: Global shutter / Random Trigger Shutter: Global shutter

Exposure time2

MANUAL: 30μs to 16s Random Trigger Shutter: 30μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)

External dimension

40(W) x 40(H) x 35(D) mm (Not including protruding parts)

External trigger input

Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 50μs (minimum)

Gamma / lut

γ=1.0 to 0.45 / In 12bit, Out 12bit

Image output format

RGB 24bit, BGR 24bit, YUV422 16bit, YUV411 12bit, Bayer 8bit / Bayer 10bit / Bayer 12bit, Mono 8bit

Image size

1.1 type

Imager

CMOS image sensor

Imager model

IMX253LQR

Interface3

USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported)

Manual

AE

Minimum illuminance

3 lx (F1.4, Gain: +24dB, Video level: 50%)

On chip color filter

RGB primary color mosaic-on-tip color filter

Operation humidity

10% to 90% (no condensation)

Operation temperature

-5°C to 45°C (below 65°C on cabinet surface)

Optical glass filter

IR Cut Filter

Pixels

12.3M

Random trigger shutter mode

Edge / Level / Bulk (255 times)

Random trigger shutter type

External Trigger / Software Trigger

Readout mode

All pixel, Scalable, Binning, Decimation, Mirroring, Flip

Scanning

Progressive

Scanning area

14.13mm(H) x 10.35mm(V)

Sequential shutter

16 entries (max)

Short time exposure mode off

Short time exposure mode ON

Synchronization system

Internal / Bus (USB)