BU302MCG

The BU302M Series is an integrated CMOS camera with a USB 5Gbps (USB3.1 Gen1) interface. For video output and camera control, the USB 5Gbps interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment. This product is a 3 year warranty correspondence.

Category: Tag: Brand:

Description

Key Features

  • High frame rate
  • USB 5Gbps (USB3.1 Gen1) interface
  • USB3 Vision Ver.1.0 conformity
  • GenICam conformity Ver2.4 / Ver3.0
  • IIDC2 Digital Camera Control Specification Ver.1.1.0
  • e-CON Connector adoption
  • Scalable Frame rate calculation tool (BU series CMOS camera)
  • Color processing (BU302MCG / BU302MCF)
  • Global shutter
  • Square grid arrangement
  • Random Trigger Shutter

Downloads

https://www.toshiba-teli.co.jp/pdf/catalog-en/usb3_cameracatalog_en.pdf
https://www.toshiba-teli.co.jp/pdf/industrial-camera-en/op-bu302m_bu505m_e.pdf
https://www.toshiba-teli.co.jp/pdf/industrial-camera-en/bu302m_bu505m_e.pdf

Additional information

Frame rate

120fps (Bayer 8bit)

Gain

MANUAL: 0 to +24dB

Image buffer

256MB / 85 frames (all pixels readout)

Interface

USB3 Camera (Compact)

Lens mount

C-mount

Mass

approx. 33g

Pixel size

3.45μm x 3.45μm

Power consumption

3.6W max.

Power supply

DC5V ±5%

Resolution

2,048(H) x 1,536(V)

Sensitivity

2,400 lx (F4, 1/120s)

White balance

Manual white-balance / One-push white-balance

Aspect ratio

4:03

Black level

-25% to +25%

Color type

Color Camera

Conformity

CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2

Electronic shutter method

MANUAL: Global shutter / Random Trigger Shutter: Global shutter

Exposure time2

MANUAL: 1.08μs to 14.44μs (Short exposure mode ON), 22μs to 16s (Short exposure mode OFF) Random Trigger Shutter: 22μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)

External dimension

29(W) x 29(H) x 16(D) mm (Not including protruding parts)

External trigger input

Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 50μs (minimum)

Gamma / lut

γ=1.0 to 0.45 / In 12bit, Out 12bit

Image output format

RGB 24bit, BGR 24bit, YUV422 16bit, YUV411 12bit, Bayer 8bit / Bayer 10bit / Bayer 12bit, Mono 8bit

Image size

1/1.8 type

Imager

CMOS image sensor

Imager model

IMX252LLR

Interface3

USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported)

Minimum illuminance

10 lx (F1.4, Gain: x8, Video level: 50%)

On chip color filter

RGB primary color mosaic-on-tip color filter

Operation humidity

10% to 90% (no condensation)

Operation temperature

0°C to 40°C (below 50°C on cabinet surface)

Optical glass filter

Dust-proof glass

Pixels

3.1M

Random trigger shutter mode

Edge / Level / Bulk (255 times)

Random trigger shutter type

External Trigger / Software Trigger

Readout mode

All pixel, Scalable, Binning, Decimation, Mirroring, Flip

Scanning

Progressive

Scanning area

7.07mm(H) x 5.30mm(V)

Sequential shutter

16 entries (max)

Synchronization system

Internal / Bus (USB)