BU1203MC
BU1203MC - Image 2

BU1203MC

The BU1203M Series is an integrated CMOS camera with a USB 5Gbps (USB3.1 Gen1) interface. For video output and camera control, the USB 5Gbps interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment. This product is a 3 year warranty correspondence.

Add to Quote
Category: Tag: Brand:

Description

Key Features

  • High frame rate
  • USB 5Gbps (USB3.1 Gen1) interface
  • USB3 Vision Ver.1.0 conformity
  • GenICam conformity Ver.2.4 / Ver.3.0
  • IIDC2 Digital Camera Control Specification Ver.1.1.0
  • e-CON Connector adoption
  • Scalable Frame rate calculation tool (BU series CMOS camera)
  • Square grid arrangement
  • Random Trigger Shutter

Downloads

https://www.toshiba-teli.co.jp/pdf/catalog-en/usb3_cameracatalog_en.pdf
https://www.toshiba-teli.co.jp/pdf/industrial-camera-en/op-bu1203mc_e.pdf
https://www.toshiba-teli.co.jp/pdf/industrial-camera-en/bu1203mc_e.pdf

Additional information

Frame rate

30fps (Bayer 8bit, Mono 8bit)
Gain

MANUAL: 0 to +18dB
Image buffer

256MB / 22 frames (all pixels readout)
Interface

USB3 Camera (Compact)
Lens mount

C-mount
Mass

approx. 32g
Pixel size

1.85μm x 1.85μm
Power consumption

2.7W max.
Power supply

DC5V ±5%
Resolution

4,000(H) x 3,000(V)
Sensitivity

4,200 lx (F8, 1/30s)
White balance

Manual white-balance / One-push white-balance
Aspect ratio

4:03
Black level

-25% to +25%
Color type

Color Camera
Conformity

CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2
Electronic shutter method

MANUAL: Rolling shutter / Random Trigger Shutter: Global reset
Exposure time2

MANUAL: 43.28μs to 16s Random Trigger Shutter: 682μs to 16s (Edge or Bulk mode), 682μs to Trigger width (Level mode)
External dimension

29(W) x 29(H) x 16(D) mm (Not including protruding parts)
External trigger input

Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 50μs (minimum)
Gamma / lut

γ=1.0 to 0.45 / In 10bit, Out 10bit
Image output format

Bayer 8bit, Mono 8bit
Image size

1/1.7 type
Imager

CMOS image sensor
Imager model

IMX226CQJ
Interface3

USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported)
Minimum illuminance

13 lx (F1.4, Gain: +18dB, Video level: 50%)
On chip color filter

RGB primary color mosaic-on-tip color filter
Operation humidity

10% to 90% (no condensation)
Operation temperature

0°C to 40°C (below 50°C on cabinet surface)
Optical glass filter

–
Pixels

12M
Random trigger shutter mode

Edge / Level / Bulk (255 times)
Random trigger shutter type

External Trigger / Software Trigger
Readout mode

All pixel, Scalable, Mirroring, Flip
Scanning

Progressive
Scanning area

7.40mm(H) x 5.55mm(V)
Sequential shutter

16 entries (max)
Synchronization system

Internal