AH3600MU000E

Sensor	IMX178
Image Sensor	1/1.8″CMOS
Shutter	Rolling/GlobalResetRealease
Resolution	3072 × 2048
Frame Rate	60 fps @3072 × 2048 Mono 8
Bit Depth	12
Mono/Color	Mono
Pixel Size	2.4 μm × 2.4 μm
Pixel	6.0 MP
S/N Ratio	41.4 dB
Dynamic Range	71.7 dB
Image Format	Mono8/10/10Packed/Mono12/Mono12Packed
Binning	off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree
ROI	Support
X Flip	Support
Y Flip	Support
Gain	1～32X
Gamma	From 0 to 3.99998, support LUT
Exposure Time	25 μs ~ 2.5 sec
Trigger Mode	Software Trigger/Hardware Trigger/Free Run Mode
SPC	Support
User Setting	Support three sets of user-defined configurations
Image Buffer	256MB
Port	USB 3.0
GPIO Interface	1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output
Lens Mount	C-mount
Power Supply	Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V
Power Consumption	≈2.4W(USB3.0 provide power supply)
Product Dimensions	29 mm×29 mm×30 mm (not including lens mount and rear case connector)
Net Weight	Approx 85g
Storage Temperature	-30℃~+80℃
Operating Temperature	-30℃~+50℃

Description

USB3.0 interface, 5Gbps theoretical transfer bandwidth, power supply via USB interface；
Compact size of 29mmx29mmx30mm
256MB on-board cache for data transmission or image resend
Support Software Trigger/Hardware Trigger/Free Run Mode
Support ISP functions including Gamma,LUT,BlackLevel,Correction,TargetBrightness,Contrast,FFC,Denoising Sharpness etc.
Support multiple image data formats output,ROI,Binning(Including Pixel arbitrary scaling),Mirror, AutoFunction,Sequencer（ Gain、Exposure） etc.
Compatible with USB3.0 Vision protocol and GenICam standard
Conform to CE/UKCA/UL/KC,RoHS

Binning	off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree
Bit depth	12
Dynamic range	71.7 dB
Exposure time	25 us ~ 2.5 sec
Frame rate	60 fps @3072 x 2048 Mono 8
Gain	1~32X
Gamma	From 0 to 3.99998, support LUT
Gpio interface	1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output
Image buffer	256MB
Image format	Mono8/10/10Packed/Mono12/Mono12Packed
Image sensor	1/1.8"CMOS
Lens mount	C-mount
Pixel	6.0 MP
Pixel size	2.4 um x 2.4 um
Port	usB 3.0
Power consumption	≈2.4W(usB3.0 provide power supply)
Power supply	Power supply via usB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V
Resolution	3072 x 2048
Roi	Support
Sensor	IMX178
Shutter	Rolling/GlobalResetRealease
Spc	Support
Storage temperature	-30℃~+80℃
Trigger mode	Software Trigger/Hardware Trigger/Free Run Mode
User setting	Support three sets of user-defined configurations
X flip	Support
Y flip	Support
Mono-color	Mono
S/n ratio	41.4 dB