EX670AMCG-X

EX670AM Series is an integrated camera with a CoaXPress 2.0 interface. Incorporating a 67MP CMOS sensor, the EX Series provides a wide field of view. The use of CXP-12 Quad allows high speed transfer of images. Measuring only 60 mm square, the chassis can be installed easily. The lens-mountless structure makes it possible to use different lenses according to the application requirements.

Category: Tag: Brand:

Description

Key Features

  • e2v 67MP CMOS sensor
  • TELI original IP core
  • Global electronic shutter
  • CoaXPress 2.0 interface
  • 50Gbps transfer bandwidth provided by CXP-12 Quad
  • GenICam conformity
  • IIDC2 Digital Camera Control Specification
  • Square grid array
  • Camera control / image acquisition by TeliCamSDK

Downloads

https://www.toshiba-teli.co.jp/pdf/industrial-camera-en/op-ex370bm_ex670am_e.pdf
https://www.toshiba-teli.co.jp/pdf/catalog-en/fl_ex-series_en.pdf
https://www.toshiba-teli.co.jp/pdf/industrial-camera-en/ex370bm_ex670am_e.pdf

Additional information

Frame rate

64.5fps (CXP-12 Quad, Mono 8bit) 31.6fps (CXP-6 Quad, Mono 8bit) 15.8fps (CXP-12, Mono 8bit) 8fps (CXP-6, Mono 8bit)

Gain

MANUAL: 0 to +36dB

Interface

CoaXPress 2.0 Camera

Mass

approx. 280g

Pixel size

2.5μm x 2.5μm

Power consumption

13.6W *1

Power supply

PoCXP / DC+24V (18.5V to 26V) (HIROSE connector)

Resolution

8,192(H) x 8,192(V)

Sensitivity

2,100 lx (F5.6, 1/66.7s)

Aspect ratio

1:01

Black level

-25% to +25%

Color type

Color Camera

Conformity

CE, FCC, RoHS, WEEE, CoaXPress 2.0, GenICam, IIDC2

Electronic shutter method

Global shutter

Exposure time2

MANUAL: 10μs to 16s Random Trigger Shutter: 10μs to 1s (Edge or Bulk mode), 200μs to Trigger width (Level mode)

External dimension

60(W) x 60(H) x 80(D) mm (Not including protruding parts)

External trigger input

"Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 200μs (minimum)

High gain mode

OFF / x4

Image output format

Bayer 8bit

Image size

1.8 type (APS-C)

Imager

CMOS image sensor

Imager model

EV2S67MB

Interface3

CoaXPress 2.0

Lens mount | flange back

8mm, Mountless (Φ50 H7)

Lut

In 12bit, Out 12bit

Minimum illuminance

1 lx (F1.4, Gain: +36dB, High Gain Mode: x4, Video level: 50%)

On chip color filter

RGB primary color mosaic-on-tip color filter

Operation humidity

10% to 90% (no condensation)

Operation temperature

0°C to 40°C (below 60°C on cabinet surface)

Optical glass filter

Dust-proof glass

Pixels

67M

Random trigger shutter mode

Edge / Level / Bulk (255 times)

Random trigger shutter type

External Trigger / Software Trigger / Link Trigger

Readout mode

All pixel, Scalable, Binning, Mirroring, Flip

Scanning

Progressive

Scanning area

20.48mm(H) x 20.48mm(V)

Sequential shutter

16 entry (max)

Synchronization system

Internal