DDU1607MCG
DDU1607MCG - Image 2

DDU1607MCG

The DDU1607M Series is an integrated CMOS camera with two USB 5Gbps (USB3.1 Gen1) interface. For video output and camera control, the USB 5Gbps interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment. This product is a 3 year warranty correspondence.

Add to Quote
Category: Tag: Brand:

Description

Key Features

  • Featuring Teli original IP “Teli Core Technology”
  • High frame rate
  • Global shutter
  • Adjustment by high-quality and high reliability productive facilities
  • USB 5Gbps (USB3.1 Gen1) interface
  • USB3 Vision Ver.1.0 conformity
  • GenICam conformity Ver.2.4 / Ver.3.0
  • IIDC2 Digital Camera Control Specification Ver.1.1.0
  • e-CON Connector adoption
  • Scalable
  • Square grid arrangement
  • Random Trigger Shutter

Downloads

https://www.toshiba-teli.co.jp/pdf/catalog-en/usb3_cameracatalog_en.pdf
https://www.toshiba-teli.co.jp/pdf/industrial-camera-en/op-ddu1607m_e.pdf
https://www.toshiba-teli.co.jp/pdf/catalog-en/fl_du_ddu_en.pdf
https://www.toshiba-teli.co.jp/pdf/industrial-camera-en/ddu1607m_e.pdf

Additional information

Frame rate

47fps (Dual USB, Mono 8bit) 23fps (Single USB, Mono 8bit)
Gain

MANUAL: x1 to x8, AGC: x1 to x8
Image buffer

256MB / 16 frames (all pixels readout)
Interface

Dual USB3 Camera
Lens mount

C-mount
Mass

approx. 90g
Pixel size

3.2μm x 3.2μm
Power consumption

5.3W max.
Power supply

DC5V ±5%
Resolution

4,000(H) x 4,000(V)
Sensitivity

2,700 lx (F5.6, 1/50s)
White balance

Manual white-balance / One-push white-balance
Aspect ratio

1:01
Black level

-25% to +25%
Color type

Color Camera
Conformity

CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2
Electronic shutter method

MANUAL: Global shutter / Random Trigger Shutter: Global shutter
Exposure time2

MANUAL: 30μs to 16s Random Trigger Shutter: 30μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)
External dimension

40(W) x 40(H) x 35(D) mm (Not including protruding parts)
External trigger input

Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 50μs (minimum)
Gamma / lut

γ=1.0 to 0.45 / In 12bit, Out 12bit
Image output format

Bayer 8bit / Bayer 10bit / Bayer 12bit
Image size

1.1 type
Imager

CMOS image sensor
Imager model

XGS16000
Interface3

USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported) / 2 channels
Minimum illuminance

11 lx (F1.4, Gain: x8, Video level: 50%)
On chip color filter

RGB primary color mosaic-on-tip color filter
Operation humidity

10% to 90% (no condensation)
Operation temperature

-5°C to 45°C (below 60°C on cabinet surface)
Optical glass filter

Dust-proof glass
Pixels

16M
Random trigger shutter mode

Edge / Level / Bulk (255 times)
Random trigger shutter type

External Trigger / Software Trigger
Readout mode

All pixel, Scalable, Binning, Decimation, Mirroring, Flip
Scanning

Progressive
Scanning area

12.80mm(H) x 12.80mm(V)
Sequential shutter

16 entries (max)
Synchronization system

Internal / Bus (USB)