| Frame rate |
19fps (Bayer 8bit)
|
| Gain |
MANUAL: 0 to +24dB
|
| Image buffer |
256MB / 12 frames (all pixels readout)
|
| Interface |
USB3 Camera (Compact)
|
| Lens mount |
C-mount
|
| Mass |
approx. 34g
|
| Pixel size |
2.40μm x 2.40μm
|
| Power consumption |
2.9W max.
|
| Power supply |
DC5V ±5%
|
| Resolution |
5,472(H) x 3,648(V)
|
| Sensitivity |
1,940 lx (F5.6, 1/19s)
|
| White balance |
Manual white-balance / One-push white-balance
|
| Aspect ratio |
3:02
|
| Black level |
-25% to +25%
|
| Color type |
Color Camera
|
| Conformity |
CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2
|
| Electronic shutter method |
MANUAL: Rolling shutter / Random Trigger Shutter: Global reset
|
| Exposure time2 |
MANUAL: 56.4μs to 16s AE: 56.4μs to 1s Random Trigger Shutter: 56.4μs to 16s (Edge or Bulk mode)
|
| External dimension |
29(W) x 29(H) x 16(D) mm (Not including protruding parts)
|
| External trigger input |
Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 50μs (minimum)
|
| Gamma / lut |
γ=1.0 to 0.45 / In 12bit, Out 12bit
|
| Image output format |
RGB 24bit, BGR 24bit, YUV422 16bit, YUV411 12bit, Bayer 8bit / Bayer 10bit / Bayer 12bit, Mono 8bit
|
| Image size |
1.0 type
|
| Imager |
CMOS image sensor
|
| Imager model |
IMX183CQJ
|
| Interface3 |
USB3.1 Gen1 (Only SuperSpeed is supported)
|
| Minimum illuminance |
4 lx (F1.4, Gain: +24dB, Video level: 50%)
|
| On chip color filter |
RGB primary color mosaic-on-tip color filter
|
| Operation humidity |
10% to 90% (no condensation)
|
| Operation temperature |
0°C to 40°C (below 60°C on cabinet surface)
|
| Optical glass filter |
IR Cut Filter
|
| Pixels |
20M
|
| Random trigger shutter mode |
Edge / Level / Bulk (255 times)
|
| Random trigger shutter type |
External Trigger / Software Trigger
|
| Readout mode |
All pixel, Scalable, Binning, Mirroring, Flip
|
| Scanning |
Progressive
|
| Scanning area |
13.13mm(H) x 8.76mm(V)
|
| Sequential shutter |
16 entries (max)
|
| Synchronization system |
Internal
|