A3051CG000E| Sensor | PYTHON480 | | Image Sensor | 1/3.6"CMOS | | Shutter | Global | | Resolution | 800 × 600 | | Frame Rate | 120 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.8 μ+m × 4.8 μm | | Pixel | 0.5MP | | S/N Ratio | >38dB | | Dynamic Range | 60dB | | Image Format | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed; | | Decimation | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈2.8W | | Product Dimensions | 29mm×29mm×42mm | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3051MG000E| Sensor | PYTHON480 | | Image Sensor | 1/3.6"CMOS | | Shutter | Global | | Resolution | 800 × 600 | | Frame Rate | 120 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 0.5MP | | S/N Ratio | >38dB | | Dynamic Range | 60dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | Decimation | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈2.8W | | Product Dimensions | 29mm×29mm×42mm | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3051MG100E| Sensor | PYTHON480 | | Image Sensor | 1/3.6"CMOS | | Shutter | Global | | Resolution | 800 × 600 | | Frame Rate | 120 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 0.5MP | | S/N Ratio | >38dB | | Dynamic Range | 60dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | Decimation | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | GigE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈2.8W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 60 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3124CG100E| Sensor | AR0135 | | Image Sensor | 1/3"CMOS | | Shutter | Global | | Resolution | 1280 × 960 | | Frame Rate | 54 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.75 μm × 3.75 μm | | Pixel | 1.2MP | | S/N Ratio | 40.7dB | | Dynamic Range | 71.1dB | | Image Format | Mono8, BayerRG8/10/10Packed/12/12Packed, BayerGB8/10/10Packed/12/12Packed, RGB8Packed,YUV422Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 18.7μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈2.8W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 60 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3124MG100E| Sensor | AR0135 | | Image Sensor | 1/3"CMOS | | Shutter | Global | | Resolution | 1280 × 960 | | Frame Rate | 54 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.75 μm × 3.75 μm | | Pixel | 1.2MP | | S/N Ratio | 40.7dB | | Dynamic Range | 71.1dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 18.7μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈2.8W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 60 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3131CG000E| Sensor | PYTHON 1300 | | Image Sensor | 1/2"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 60 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 1.3MP | | S/N Ratio | >38dB | | Dynamic Range | 60dB | | Image Format | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed; | | Decimation | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈3.4W | | Product Dimensions | 29mm×29mm×42mm | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3131MG000E| Sensor | PYTHON 1300 | | Image Sensor | 1/2"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 60 fps | | Bit Depth | 10 | | Mono/Color | 黑白 | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 1.3MP | | S/N Ratio | >38dB | | Dynamic Range | 60dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | Decimation | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈3.4W | | Product Dimensions | 29mm×29mm×42mm | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3131MG100E| Sensor | PYTHON 1300 | | Image Sensor | 1/2"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 60 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 1.3MP | | S/N Ratio | >38dB | | Dynamic Range | 60dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | Decimation | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | GigE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈2.8W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 60 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3135CG000E| Sensor | RJ33J3CA0DT | | Image Sensor | 1/3"CCD | | Shutter | Global | | Resolution | 1280 × 960 | | Frame Rate | 30 fps | | Bit Depth | 14 | | Mono/Color | Color | | Pixel Size | 3.75 μm × 3.75 μm | | Pixel | 1.2 MP | | S/N Ratio | >38 dB | | Dynamic Range | 63 dB | | Image Format | Mono8, BayerRG8/10/10Packed/12/Packed, BayerGB8/10/10Packed/12/Packed, YUV422Packed; | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1 μs~1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output | | Lens Mount | C | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.4 W | | Product Dimensions | 29 mm×29 mm×42 mm | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3135CU000E| Sensor | RJ33J4CA0DT | | Image Sensor | 1/3"CCD | | Shutter | Global | | Resolution | 1280 × 960 | | Frame Rate | 33 fps | | Bit Depth | 14 | | Mono/Color | Color | | Pixel Size | 3.75 μm × 3.75 μm | | Pixel | 1.2MP | | S/N Ratio | >38dB | | Dynamic Range | 63dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.4W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A3135MG000E| Sensor | RJ33J4CA0DT | | Image Sensor | 1/3"CCD | | Shutter | Global | | Resolution | 1280 × 960 | | Frame Rate | 30 fps | | Bit Depth | 14 | | Mono/Color | Mono | | Pixel Size | 3.75 μm × 3.75 μm | | Pixel | 1.2 MP | | S/N Ratio | >38 dB | | Dynamic Range | 63 dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1 μs~1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output | | Lens Mount | C | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.4 W | | Product Dimensions | 29mm×29mm×42mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3135MU000E| Sensor | RJ33J4CA0DT | | Image Sensor | 1/3"CCD | | Shutter | Global | | Resolution | 1280 × 960 | | Frame Rate | 33 fps | | Bit Depth | 14 | | Mono/Color | Mono | | Pixel Size | 3.75 μm × 3.75 μm | | Pixel | 1.2MP | | S/N Ratio | >38dB | | Dynamic Range | 63dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.4W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A3138CU000E| Sensor | SS | | Image Sensor | 1/2.7"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 201 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.0 μm × 4.0 μm | | Pixel | 1.3MP | | S/N Ratio | 40dB | | Dynamic Range | 60dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | From 0 to 4, support LUT | | Exposure Time | 10μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.8W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
|
|
A3138MU000E| Sensor | SS | | Image Sensor | 1/2.7"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 201 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 4.0 μm × 4.0 μm | | Pixel | 1.3MP | | S/N Ratio | 40dB | | Dynamic Range | 60dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 10μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.8W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A3139CG000E| Sensor | — | | Image Sensor | 1/2"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 92 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 1.3 MP | | S/N Ratio | 40 dB | | Dynamic Range | >58 dB | | Image Format | Mono8,BayerRG8/10/10Packed,YUV422_8_UYVY,YUV422_8 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16 μs~1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256 MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.4 W | | Product Dimensions | 29 mm × 29 m × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3200CG000E| Sensor | IMX290 | | Image Sensor | 1/2.8"CMOS | | Shutter | Rolling | | Resolution | 1920 × 1080 | | Frame Rate | 22 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.9 μm × 2.9 μm | | Pixel | 2.07MP | | S/N Ratio | >38dB | | Dynamic Range | Support DOL-HDR | | Image Format | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 17.5μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈3.3W | | Product Dimensions | 29mm×29mm×42mm | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3200CU000E| Sensor | IMX290 | | Image Sensor | 1/2.8"CMOS | | Shutter | Rolling | | Resolution | 1920 × 1080 | | Frame Rate | 120 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.9 μm × 2.9 μm | | Pixel | 2.07MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 8μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.8W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A3200MG004E| Sensor | IMX290 | | Image Sensor | 1/2.8"CMOS | | Shutter | Rolling | | Resolution | 1920 × 1080 | | Frame Rate | 22 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.9 μm × 2.9 μm | | Pixel | 2.07MP | | S/N Ratio | >38dB | | Dynamic Range | Support DOL-HDR | | Image Format | Mono8 | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 17.5μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈3.3W | | Product Dimensions | 29mm×29mm×42mm | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3504CG000E| Sensor | AR0521 | | Image Sensor | 1/2.5"CMOS | | Shutter | Rolling | | Resolution | 2592 × 1944 | | Frame Rate | 23 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 2.2 μm × 2.2 μm | | Pixel | 5.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 74.3 dB | | Image Format | Mono8,BayerRG8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 21.5 μs~1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256 MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.8 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3504CG100E| Sensor | AR0521 | | Image Sensor | 1/2.5"CMOS | | Shutter | Rolling | | Resolution | 2592 × 1944 | | Frame Rate | 23 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 2.2 μm × 2.2 μm | | Pixel | 5.0MP | | S/N Ratio | 40dB | | Dynamic Range | 74.3dB | | Image Format | Mono8, BayerRG8/10/10Packed/12/12Packed, BayerGB8/10/10Packed/12/12Packed, RGB8Packed,YUV422Packed; | | ROI | Support | | Gain | 1~32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 21.5μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈2.8W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 60 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3504MG000E| Sensor | AR0521 | | Image Sensor | 1/2.5"CMOS | | Shutter | Rolling | | Resolution | 2592 × 1944 | | Frame Rate | 23 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.2 μm × 2.2 μm | | Pixel | 5.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 74.3 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed; | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 21.5 μs~1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256 MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.8 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3504MG100E| Sensor | AR0521 | | Image Sensor | 1/2.5"CMOS | | Shutter | Rolling | | Resolution | 2592 × 1944 | | Frame Rate | 23 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.2 μm × 2.2 μm | | Pixel | 5.0MP | | S/N Ratio | 40dB | | Dynamic Range | 74.3dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 21.5μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | GigE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈2.8W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 60 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3600CU60E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling | | Resolution | 3072 × 2048 | | Frame Rate | 60 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.2MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | From 0 to 4, support LUT | | Exposure Time | 11μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.4W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A3600MG100E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling | | Resolution | 3072 × 2048 | | Frame Rate | 18 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.0 MP | | S/N Ratio | >38dB | | Dynamic Range | 73dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 25μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈3.4W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 60 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3600MG18E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling | | Resolution | 3072 × 2048 | | Frame Rate | 19 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.0 MP | | S/N Ratio | >38dB | | Dynamic Range | 73dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 25μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈3.4W | | Product Dimensions | 29mm×29mm×42mm | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3600MU60E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling | | Resolution | 3072 × 2048 | | Frame Rate | 60 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.2MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 11μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.4W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A3A04MG10E| Sensor | MT9J003 | | Image Sensor | 1/2.3"CMOS | | Shutter | Rolling | | Resolution | 3840 × 2748 | | Frame Rate | 10 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 1.67 μm × 1.67 μm | | Pixel | 10.6MP | | S/N Ratio | >32dB | | Dynamic Range | 65dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 25μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈2.9W | | Product Dimensions | 29mm×29mm×42mm | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3A20CU24E| Sensor | IMX226 | | Image Sensor | 1/1.7"CMOS | | Shutter | Rolling | | Resolution | 4000 × 3000 | | Frame Rate | 30 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 1.85 μm × 1.85 μm | | Pixel | 12MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | From 0 to 4, support LUT | | Exposure Time | 55μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.1 W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A3A20MU24E| Sensor | IMX226 | | Image Sensor | 1/1.7"CMOS | | Shutter | Rolling | | Resolution | 4000 × 3000 | | Frame Rate | 30 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 1.85 μm × 1.85 μm | | Pixel | 12MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.1 W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ | | Sensor | IMX226 | | Image Sensor | 1/1.7"CMOS | | Shutter | Rolling | | Resolution | 4000 × 3000 | | Frame Rate | 30 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 1.85 μm × 1.85 μm | | Pixel | 12MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.1 W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A3B00CG000E| Sensor | IMX183 | | Image Sensor | 1"CMOS | | Shutter | Rolling | | Resolution | 5472 × 3648 | | Frame Rate | 6 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 20.0 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8,BayerRG8/10/10Packed,YUV422_8_UYVY,YUV422_8 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16 μs~1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.6 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3B00CU000E| Sensor | IMX183 | | Image Sensor | 1" CMOS | | Shutter | Rolling | | Resolution | 5472 × 3648 | | Frame Rate | 19.66 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 20MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 128MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.2W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A3B00MG000E| Sensor | IMX183 | | Image Sensor | 1"CMOS | | Shutter | Rolling | | Resolution | 5472 × 3648 | | Frame Rate | 6 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 20.0 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16 μs~1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.3 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3B00MU000E| Sensor | IMX183 | | Image Sensor | 1" CMOS | | Shutter | Rolling | | Resolution | 5472 × 3648 | | Frame Rate | 19.66 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 20MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 128MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.2W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A5051CU545E| Sensor | PYTHON 500 | | Image Sensor | 1/3.6"CMOS | | Shutter | Global | | Resolution | 800 × 600 | | Frame Rate | 545 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 0.5MP | | S/N Ratio | >38dB | | Dynamic Range | 60dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | Decimation | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB image cache | | Port | USB3.0 | | GPIO Interface | 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.4W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 60 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A5501MG20E-NIR| Sensor | PYTHON 5000 NIR | | Image Sensor | 1"CMOS | | Shutter | Global | | Resolution | 2592 × 2048 | | Frame Rate | 20 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 5.3 MP | | S/N Ratio | >38dB | | Dynamic Range | 60 dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1 μs~1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.8 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A7200MG30E| Sensor | IMX249 | | Image Sensor | 1/1.2"CMOS | | Shutter | Global | | Resolution | 1920 × 1200 | | Frame Rate | 38 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 5.86 μm × 5.86 μm | | Pixel | 2 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed; | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 14 μs~1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.0 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A7230CU000E| Sensor | IMX392 | | Image Sensor | 1/2.3"CMOS | | Shutter | Global | | Resolution | 1920 × 1200 | | Frame Rate | 167 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 2.3MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | BayerRG8/10/10Packed;BayerGB8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.9W | | Product Dimensions | 29mm × 29mm × 29mm (not including rear case connector) | | Net Weight | 60g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A7230MU000E| Sensor | IMX392 | | Image Sensor | 1/2.3"CMOS | | Shutter | Global | | Resolution | 1920 × 1200 | | Frame Rate | 167 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 2.3MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.9W | | Product Dimensions | 29mm × 29mm × 29mm (not including rear case connector) | | Net Weight | 60g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A7500MG20E| Sensor | IMX264 | | Image Sensor | 2/3"CMOS | | Shutter | Global | | Resolution | 2448 × 2048 | | Frame Rate | 24 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 5.0 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed; | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1 μs~1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.5 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A7501CG010E| Sensor | XGS5000 | | Image Sensor | 2/3"CMOS | | Shutter | Global | | Resolution | 2592 × 2048 | | Frame Rate | 21 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 5.0 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8,BayerRG8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1-32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 25 μs-10 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE,PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.2 W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | - 30℃~+80℃ | | Operating Temperature | - 30℃~+50℃ |
|
A780AMU000E| Sensor | IMX546 | | Image Sensor | 2/3"CMOS | | Shutter | Global | | Resolution | 2840 × 2840 | | Frame Rate | 47 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.74 μm × 2.74 μm | | Pixel | 8MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.9W | | Product Dimensions | 29mm × 29mm × 29mm (not including rear case connector) | | Net Weight | 60g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A7A20CG9E| Sensor | IMX304 | | Image Sensor | 1.1''CMOS | | Shutter | Global | | Resolution | 4096 × 3000 | | Frame Rate | 9 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 12.29MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | Mono8, BayerRG8/10/10Packed,BayerGB8/10/10Packed, YUV422Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | From 0 to 4, support LUT | | Exposure Time | 48μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈3.2W | | Product Dimensions | 29mm×44mm×58mm (not including lens mount and rear case connector) | | Net Weight | 100 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A7A20MG9E| Sensor | IMX304 | | Image Sensor | 1.1''CMOS | | Shutter | Global | | Resolution | 4096 × 3000 | | Frame Rate | 9 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 12.29MP | | S/N Ratio | >38dB | | Dynamic Range | 70dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | 0~4, 支持LUT | | Exposure Time | 48μS~1S | | Trigger Mode | Support Software Trigger/Hardware Trigger/Free Run Mode; | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈3.2W | | Product Dimensions | 29mm×44mm×58mm (not including lens mount and rear case connector) | | Net Weight | 100 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A7A21MG400E| Sensor | XGS12000 | | Image Sensor | 1''CMOS | | Shutter | Global | | Resolution | 4096 × 3072 | | Frame Rate | 9 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 12MP | | S/N Ratio | >38dB | | Dynamic Range | 70dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 69μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | GigE,PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈3.2W | | Product Dimensions | 29mm×29mm×42mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A7A2AMU000E| Sensor | IMX545 | | Image Sensor | 1/1.1"CMOS | | Shutter | Global | | Resolution | 4096 × 3000 | | Frame Rate | 31 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.74 μm × 2.74 μm | | Pixel | 12MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈4.1W | | Product Dimensions | 29mm × 29mm × 29mm (not including rear case connector) | | Net Weight | 60g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A9-0828-6MP| ?? | A9-6MP?? | | ?? | A9-0828-6MP | | ???? | 8 mm | | ???? | F2.8 - 16 | | ???? | ?9.4 mm(1/1.8") | | ???? | 0.1m to infinite | | ???? | -0.0028 | | TV?? | -0.0015 | | ??? | 42.2°×50.36°×34.81° (9 mm×7.4 mm×4.9 mm) | | ???? | 80% (F2.8); 90% (F4.0) | | ?????? | 8° | | ???? | 436 nm?656 nm | | ????? | T> 85% | | ?? | 48±5 g | | ???? | C? | | ???? | M27×P0.5 | | ???? | ???? | | ???? | ???? | | ???? | 31.1×?30 mm | | ???? | -20°C?+50°C |
|
A9-0828-6MPE| Series | A9-6MP Series | | Model | A9-0828-6MPE | | Focal Length | 8 mm | | Aperture | F2.8 - 16 | | Image Sensor Size | ?9.4 mm(1/1.8") | | Focus Range | 0.1 m to infinite | | Optical Distortion | -0.28% | | TV Distortion | -0.15% | | Field of View | 58.94°×50.36°×34.81° (9 mm×7.4 mm×4.9 mm) | | Relative Illumination | 80% (F2.8); 90% (F4.0) | | CRA?Chief Ray Angle) | 8° | | Spectral Range | 436 nm~656 nm | | Spectral Transmission | T?85% | | Camera Mount | C - Mount | | Filter Thread | M27×P0.5 | | Focus Control | Manual | | Iris Control | Manual | | Product Dimensions | 30.78×?30 mm | | Net Weight | 48±5 g | | Operating Temperature | -20°C ~ +50°C |
|
A9-1228-6MP| Series | A9-6MP Series | | Model | A9-1228-6MP | | Focal Length | 12 mm | | Aperture | F2.8 - 16 | | Image Sensor Size | ?9.4 mm(1/1.8") | | Focus Range | 0.1 m to infinite | | Optical Distortion | 0.1% | | TV Distortion | 0.05% | | Field of View | 42.2°×34.96°×23.7° (9 mm×7.4 mm×4.9 mm) | | Relative Illumination | 78% (F2.8); 92% (F4.0) | | CRA?Chief Ray Angle) | 7.9° | | Spectral Range | 436 nm~656 nm | | Spectral Transmission | T?85% | | Camera Mount | C - Mount | | Filter Thread | M27×P0.5 | | Focus Control | Manual | | Iris Control | Manual | | Product Dimensions | 30×?30 mm | | Net Weight | 48±5 g | | Operating Temperature | -20°C ~ +50°C |
|
A9-1628-6MP| Series | A9-6MP Series | | Model | A9-1628-6MP | | Focal Length | 16 mm | | Aperture | F2.8 - 16 | | Image Sensor Size | ?9.4 mm(1/1.8") | | Focus Range | 0.1 m to infinite | | Optical Distortion | 0.1% | | TV Distortion | 0.05% | | Field of View | 30.2°×24.6°×18.2°(9 mm×7.4 mm×4.9 mm) | | Relative Illumination | 85% (F2.8); 95% (F4.0) | | CRA?Chief Ray Angle) | 7.7° | | Spectral Range | 436 nm~656 nm | | Spectral Transmission | T?85% | | Camera Mount | C - Mount | | Filter Thread | M27×P0.5 | | Focus Control | Manual | | Iris Control | Manual | | Product Dimensions | 36.9×?30 mm | | Net Weight | 56±5 g | | Operating Temperature | -20°C ~ +50°C |
|
A9-2528-6MPE| Series | A9-6MP Series | | Model | A9-2528-6MPE | | Focal Length | 25 mm | | Aperture | F2.8 - 16 | | Image Sensor Size | ?9.4 mm(1/1.8") | | Focus Range | 0.15 m to infinite | | Optical Distortion | 0.1% | | TV Distortion | 0.05% | | Field of View | 20.98°×17.2°×11.5°(9 mm×7.4 mm×4.9 mm) | | Relative Illumination | 90% (F2.8); 95% (F4.0) | | CRA?Chief Ray Angle) | 7.8° | | Spectral Range | 436 nm~656 nm | | Spectral Transmission | T?85% | | Camera Mount | C - Mount | | Filter Thread | M27×P0.5 | | Focus Control | Manual | | Iris Control | Manual | | Product Dimensions | 33.5×?30 mm | | Net Weight | 47±5 g | | Operating Temperature | -20°C ~ +50°C |
|
A9-3528-6MP| Series | A9-6MP Series | | Model | A9-3528-6MP | | Focal Length | 35 mm | | Aperture | F2.8 - 16 | | Image Sensor Size | ?9.4 mm(1/1.8") | | Focus Range | 0.2 m to infinite | | Optical Distortion | -0.09% | | TV Distortion | -0.04% | | Field of View | 13.6°×11.3°×7.5°(9 mm×7.4 mm×4.9 mm) | | Relative Illumination | 93% (F2.8); 95% (F4.0) | | CRA?Chief Ray Angle) | 6.84° | | Spectral Range | 436 nm~656 nm | | Spectral Transmission | T?85% | | Camera Mount | C - Mount | | Filter Thread | M27×P0.5 | | Focus Control | Manual | | Iris Control | Manual | | Product Dimensions | 39.8×?30 mm | | Net Weight | 60±5 g | | Operating Temperature | -20°C ~ +50°C |
|
A9-5028-6MPE| Series | A9-6MP Series | | Model | A9-5028-6MPE | | Focal Length | 50 mm | | Aperture | F2.8 - 16 | | Image Sensor Size | ?9.4 mm(1/1.8") | | Focus Range | 0.25 m to infinite | | Optical Distortion | -0.12% | | TV Distortion | -0.05% | | Field of View | 9.7°×7.93°×5.29°(9 mm×7.4 mm×4.9 mm) | | Relative Illumination | 90% (F2.8); 95% (F4.0) | | CRA?Chief Ray Angle) | 5° | | Spectral Range | 436 nm~656 nm | | Spectral Transmission | T?85% | | Camera Mount | C - Mount | | Filter Thread | M27×P0.5 | | Focus Control | Manual | | Iris Control | Manual | | Product Dimensions | 48×?30 mm | | Net Weight | 67±5 g | | Operating Temperature | -20°C ~ +50°C |
|
A9507CX703E| Sensor | GMAX2505 | | Image Sensor | 6.5 mm × 5.4 mm CMOS | | Shutter | Global | | Resolution | 2592 × 2160 | | Frame Rate | 210 fps | | Bit Depth | 10 bit | | Mono/Color | Color | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 5 MP | | S/N Ratio | 36.9 dB | | Dynamic Range | 62 dB | | Image Format | BayerGB8/BayerGB10 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1× ~ 2×, Digital gain: 1× ~ 100× | | Exposure Time | 2 μs ~ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 1× Opto-isolated input, 1× Opto-isolated output, 1× configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 6 Hirose interface, support PoCXP | | Power Consumption | 24 V ≈ 6.4 W | | Product Dimensions | 50 mm × 50 mm × 44.7 mm (Non including rear case connector) | | Net Weight | 240 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+40℃ |
|
A9507MX703E| Sensor | GMAX2505 | | Image Sensor | 6.5 mm × 5.4 mm CMOS | | Shutter | Global | | Resolution | 2592 × 2160 | | Frame Rate | 210 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 5 MP | | S/N Ratio | 36 dB | | Dynamic Range | 62 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1× ~ 2×, Digital gain: 1× ~ 100× | | Exposure Time | 2 μs ~ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 1× Opto-isolated input, 1× Opto-isolated output, 1× configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 6 Hirose interface, support PoCXP | | Power Consumption | 24 V ≈ 6.4 W | | Product Dimensions | 50 mm × 50 mm × 44.7 mm (Non including rear case connector) | | Net Weight | 240 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+40℃ |
|
A9907MX703E| Sensor | GMAX2509 | | Image Sensor | 10.5 mm × 5.4 mm CMOS | | Shutter | Global | | Resolution | 4192 × 2160 | | Frame Rate | 120 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 9 MP | | S/N Ratio | 36 dB | | Dynamic Range | 62 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1× ~ 2×, Digital gain: 1× ~ 100× | | Exposure Time | 2 μs ~ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 1× Opto-isolated input, 1× Opto-isolated output, 1× configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 6 Hirose interface, support PoCXP | | Power Consumption | 24 V ≈ 6.9 W | | Product Dimensions | 50 mm × 50 mm × 44.7 mm (Non including rear case connector) | | Net Weight | 240 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+40℃ |
|
A9A27MX703E| Sensor | Customized | | Image Sensor | 11.27 mm × 10.24 mm CMOS | | Shutter | Global | | Resolution | 4096 × 3072 | | Frame Rate | 85 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 12 MP | | S/N Ratio | 37.7 dB | | Dynamic Range | 66.9 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog Gain: 1× ~ 2×, Digital Gain: 1× ~ 100× | | Exposure Time | 8 μS ~ 5 S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 1× Opto-isolated input, 1× Opto-isolated output, 1× configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 6 Hirose interface, support PoCXP | | Power Consumption | 24V ≈ 7.8W | | Product Dimensions | 50 mm × 50 mm × 44.8 mm (Non including rear case connector) | | Net Weight | 240 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+40℃ |
|
A9A87MX703E| Sensor | GMAX2518 | | Image Sensor | 11.27 mm × 10.24 mm CMOS | | Shutter | Global | | Resolution | 4496 × 4096 | | Frame Rate | 64 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 18 MP | | S/N Ratio | 37.7 dB | | Dynamic Range | 66.9 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog Gain: 1× ~ 2×, Digital Gain: 1× ~ 100× | | Exposure Time | 8 μS ~ 5 S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 1× Opto-isolated input, 1× Opto-isolated output, 1× configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 6 Hirose interface, support PoCXP | | Power Consumption | 24V ≈ 8W | | Product Dimensions | 50 mm × 50 mm × 44.8 mm (Non including rear case connector) | | Net Weight | 240 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+40℃ |
|
A9B57CP050E| Sensor | GMAX0505 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 150 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25MP | | S/N Ratio | 36dB | | Dynamic Range | 63dB | | Image Format | BayerGR8 /BayerGR10 /BayerGR12 /BayerRG8 /BayerRG10 /BayerRG12/BayerGB8/BayerGB10/BayerGB12/BayerBG8/BayerBG10/BayerBG12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~100 | | White Balance | Support | | Exposure Time | 15μS~5S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 2GB data cache | | Port | CXP-12 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output;1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12-pin Hirose interface; | | Power Consumption | 24V≈19.4W | | Product Dimensions | 80mm×80mm×72mm(not including rear case connector) | | Net Weight | 890 g | | Storage Temperature | - 30℃~+80℃ | | Operating Temperature | - 30℃~+50℃ |
|
A9B57CP340E| Sensor | GMAX0505 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 150 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25MP | | S/N Ratio | 36dB | | Dynamic Range | 63dB | | Image Format | BayerGR8 /BayerGR10 /BayerGR12 /BayerRG8 /BayerRG10 /BayerRG12/BayerGB8/BayerGB10/BayerGB12/BayerBG8/BayerBG10/BayerBG12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~100 | | White Balance | Support | | Exposure Time | 15μS~5S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 2GB data cache | | Port | CXP-12 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output;1x RS232 | | Lens Mount | M42x1 | | Power Supply | DC 24V power supply via 12-pin Hirose interface; | | Power Consumption | 24V≈19.4W | | Product Dimensions | 80mm×80mm×65mm(not including rear case connector) | | Net Weight | 890 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A9B57CX200E| Sensor | GMAX0505 | | Image Sensor | 1.1" CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 90 fps | | Bit Depth | 10 bit | | Mono/Color | Color | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25 MP | | S/N Ratio | 36 dB | | Dynamic Range | 63 dB | | Image Format | BayerGR8/BayerGR10/BayerGR12/BayerRG8/BayerRG10/BayerRG12/BayerGB8/BayerGB10/BayerGB12/BayerBG8/BayerBG10/BayerBG12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1× ~ 100× | | Exposure Time | 25 μs ~ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 3× Opto-isolated input, 3× Opto-isolated output, 1× RS232 | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 12-pin Hirose interface | | Power Consumption | 24V ≈ 13W | | Product Dimensions | 72 mm × 72 mm × 74.8 mm (Non including rear case connector) | | Net Weight | 720 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A9B57CX250E| Sensor | GMAX0505 | | Image Sensor | 1.1" CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 90 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25MP | | S/N Ratio | 36dB | | Dynamic Range | 63dB | | Image Format | BayerGR8 /BayerGR10 /BayerGR12 /BayerRG8 /BayerRG10 /BayerRG12/BayerGB8/BayerGB10/BayerGB12/BayerBG8/BayerBG10/BayerBG12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~100 | | White Balance | Support | | Exposure Time | 25μS~5S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 2GB data cache | | Port | CXP-6 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output;1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 12V~24V power supply via 12-pin Hirose interface; | | Power Consumption | 24V≈13W | | Product Dimensions | 72 mm × 72 mm × 70 mm (not including rear case connector) | | Net Weight | 720 g | | Storage Temperature | - 30℃~+80℃ | | Operating Temperature | - 30℃~+50℃ |
|
A9B57CX703E| Sensor | GMAX0505 | | Image Sensor | 1.1" CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 41.8 fps | | Bit Depth | 12 bit | | Mono/Color | Color | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25 MP | | S/N Ratio | 36 dB | | Dynamic Range | 63 dB | | Image Format | BayerGB8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog Gain: 1× ~ 2×, Digital Gain: 1× ~ 100× | | White Balance | Support | | Exposure Time | 25 μS ~ 5 S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 1× Opto-isolated input, 1× Opto-isolated output, 1× configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 6 Hirose interface, support PoCXP | | Power Consumption | 24V ≈ 7.3W | | Product Dimensions | 50 mm × 50 mm × 45 mm (Non including rear case connector) | | Net Weight | 240 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+40℃ |
|
A9B57MP050E| Sensor | GMAX0505 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 150 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25MP | | S/N Ratio | 36dB | | Dynamic Range | 63dB | | Image Format | Mono8/Mono10/Mono12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~100 | | Exposure Time | 15μS~5S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 2GB data cache | | Port | CXP-12 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output;1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12-pin Hirose interface; | | Power Consumption | 24V≈19.4W | | Product Dimensions | 80mm×80mm×72mm(not including rear case connector) | | Net Weight | 890 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A9B57MP340E| Sensor | GMAX0505 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 150 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25MP | | S/N Ratio | 36dB | | Dynamic Range | 63dB | | Image Format | Mono8/Mono10/Mono12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~100 | | Exposure Time | 15μS~5S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 2GB data cache | | Port | CXP-12 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output;1x RS232 | | Lens Mount | M42x1 | | Power Supply | DC 24V power supply via 12-pin Hirose interface; | | Power Consumption | 24V≈19.4W | | Product Dimensions | 80mm×80mm×65mm(not including rear case connector) | | Net Weight | 890 g | | Storage Temperature | - 30℃~+80℃ | | Operating Temperature | - 30℃~+50℃ |
|
A9B57MX200E| Sensor | GMAX0505 | | Image Sensor | 1.1" CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 90 fps | | Bit Depth | 10 bit | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25 MP | | S/N Ratio | 36 dB | | Dynamic Range | 63 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1× ~ 100× | | Exposure Time | 15 μs ~ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 3× Opto-isolated input, 3× Opto-isolated output, 1× RS232 | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 12-pin Hirose interface | | Power Consumption | 24V ≈ 13W | | Product Dimensions | 72 mm × 72 mm × 74.8 mm (Non including rear case connector) | | Net Weight | 720 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A9B57MX250E| Sensor | GMAX0505 | | Image Sensor | 1.1" CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 90 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25MP | | S/N Ratio | 36dB | | Dynamic Range | 63dB | | Image Format | Mono8/Mono10/Mono12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~100 | | Exposure Time | 25μS~5S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 2GB data cache | | Port | CXP-6 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output;1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12-pin Hirose interface; | | Power Consumption | 24V≈13W | | Product Dimensions | 72 mm × 72 mm × 70 mm (not including rear case connector) | | Net Weight | 720 g | | Storage Temperature | - 30℃~+80℃ | | Operating Temperature | - 30℃~+50℃ |
|
A9B57MX703E| Sensor | GMAX0505 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 42 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25 MP | | S/N Ratio | 36 dB | | Dynamic Range | 63 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1× ~ 2×, Digital gain: 1× ~ 100× | | Exposure Time | 25 μs ~ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 1× Opto-isolated input, 1× Opto-isolated output, 1× configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 6 Hirose interface, support PoCXP | | Power Consumption | 24 V ≈ 8 W | | Product Dimensions | 50 mm × 50 mm × 45 mm (Non including rear case connector) | | Net Weight | 240 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+40℃ |
|
AB3138CU000E| Sensor | SS | | Image Sensor | 1/2.7"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 201 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.0 μm × 4.0 μm | | Pixel | 1.3 MP | | S/N Ratio | 40 dB | | Dynamic Range | 60 dB | | Image Format | BayerRG8/BayerGB8/BayerRG10/BayerGB10/BayerRG10Packed/BayerGB10Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | White Balance | Support | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 10 μs~1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64 MB | | Port | USB 3.0 | | GPIO Interface | Standard 5 pin trigger connecter: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector | | Power Consumption | ≈2.8 W | | Product Dimensions | 35 mm × 35 mm × 19 mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB3138MU000E| Sensor | SS | | Image Sensor | 1/2.7"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 201 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 4.0 μm × 4.0 μm | | Pixel | 1.3MP | | S/N Ratio | 40dB | | Dynamic Range | 60dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | from 0 to 4, support LUT | | Exposure Time | 10μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB image cache | | Port | USB3.0 | | GPIO Interface | Standard 5 pin trigger connecter: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | power supply via USB interface(conform to USB3.0 interface specification) | | Power Consumption | ≈2.8W | | Product Dimensions | 35mm×35mm×19mm | | Net Weight | 46 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB3600CU000E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling | | Resolution | 3072 × 2048 | | Frame Rate | 60 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.2MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | from 0 to 4, support LUT | | Exposure Time | 11μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | Standard 5 pin trigger connecter: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | power supply via USB interface(conform to USB3.0 interface specification) | | Power Consumption | ≈2.8W | | Product Dimensions | 35mm×35mm×19mm | | Net Weight | 46 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB3600CU010E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling | | Resolution | 3072 × 2048 | | Frame Rate | 60 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.2MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 11μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | Standard 5 pin trigger connecter: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | M12 | | Power Supply | power supply via USB interface(conform to USB3.0 interface specification) | | Power Consumption | ≈2.8W | | Product Dimensions | 35mm×35mm×19mm | | Net Weight | 46 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB3600MG000E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling | | Resolution | 3072 × 2048 | | Frame Rate | 18 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6 MP | | S/N Ratio | >38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 25μ s~1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256 MB | | Port | GigE | | GPIO Interface | 1 × Opto-isolated input, 1 × Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | DC power supply by 8 pin Socket connector, with voltage range from 9V to 24V | | Power Consumption | 12V≈3.4W | | Product Dimensions | 55 mm × 55 mm × 14 mm(not including lens mount and rear case connector) | | Net Weight | 60 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AB3600MU000E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling | | Resolution | 3072 × 2048 | | Frame Rate | 60 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.2MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | SUpport | | Gain | 1~32 | | Gamma | from 0 to 4, support LUT | | Exposure Time | 11μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | Standard 5 pin trigger connecter: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | power supply via USB interface(conform to USB3.0 interface specification) | | Power Consumption | ≈2.8W | | Product Dimensions | 35mm×35mm×19mm | | Net Weight | 46 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB3A20CU000E| Sensor | IMX226 | | Image Sensor | 1/1.7"CMOS | | Shutter | Rolling | | Resolution | 4000 × 3000 | | Frame Rate | 30 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 1.85 μm × 1.85 μm | | Pixel | 12MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | from 0 to 4, support LUT | | Exposure Time | 55μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB image cache | | Port | USB3.0 | | GPIO Interface | Standard 5 pin trigger connecter: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | power supply via USB interface(conform to USB3.0 interface specification) | | Power Consumption | ≈2.8W | | Product Dimensions | 35mm×35mm×19mm | | Net Weight | 46 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB3A20MU000E| Sensor | IMX226 | | Image Sensor | 1/1.7"CMOS | | Shutter | Rolling | | Resolution | 4000 × 3000 | | Frame Rate | 30 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 1.85 μm × 1.85 μm | | Pixel | 12MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | from 0 to 4, support LUT | | Exposure Time | 55μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB image cache | | Port | USB3.0 | | GPIO Interface | Standard 5 pin trigger connecter: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | power supply via USB interface(conform to USB3.0 interface specification) | | Power Consumption | ≈2.8W | | Product Dimensions | 35mm×35mm×19mm | | Net Weight | 46 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB5131CU000E| Sensor | PYTHON 1300 | | Image Sensor | 1/2"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 208 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 1.3MP | | S/N Ratio | >38dB | | Dynamic Range | 60dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | from 0 to 4, support LUT | | Exposure Time | 40μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB image cache | | Port | USB3.0 | | GPIO Interface | Standard 5 pin trigger connecter: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | power supply via USB interface(conform to USB3.0 interface specification) | | Power Consumption | ≈3.4W | | Product Dimensions | 35mm×35mm×19mm | | Net Weight | 46 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB5131MU000E| Sensor | PYTHON 1300 | | Image Sensor | 1/2"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 208 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 1.3MP | | S/N Ratio | >38dB | | Dynamic Range | 60dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | from 0 to 4, support LUT | | Exposure Time | 40μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB image cache | | Port | USB3.0 | | GPIO Interface | Standard 5 pin trigger connecter: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | power supply via USB interface(conform to USB3.0 interface specification) | | Power Consumption | 12V≈3.4W | | Product Dimensions | 35mm×35mm×19mm | | Net Weight | 46 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB7160CU000E| Sensor | IMX273 | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 1440 × 1080 | | Frame Rate | 249 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 3MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | BayerRG8/10/10Packed;BayerGB8/10/10Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | White Balance | Support | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 5-core white plug interface: 1 optocoupler isolated input, 1 optocoupler isolated output, and 1 configurable input/output without optocoupler isolation | | Lens Mount | C | | Power Supply | 5.0V/900mA, powered through USB3.0 interface (compliant with USB3.0 interface specifications) | | Power Consumption | ≈2.8W | | Product Dimensions | 35 mm × 35 mm × 19 mm (not including lens mount and rear case connector) | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB7200MU000E| Sensor | IMX174 | | Image Sensor | 1/1.2"CMOS | | Shutter | Global | | Resolution | 1920 × 1200 | | Frame Rate | 164 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 5.86 μm × 5.86 μm | | Pixel | 2.3MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 5-core white plug interface: 1 optocoupler isolated input, 1 optocoupler isolated output, and 1 configurable input/output without optocoupler isolation | | Lens Mount | C | | Power Supply | 5.0V/900mA, powered through USB3.0 interface (compliant with USB3.0 interface specifications) | | Power Consumption | ≈2.8W | | Product Dimensions | 35 mm × 35 mm × 19 mm (not including lens mount and rear case connector) | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB7200MU102E| Sensor | IMX174 | | Image Sensor | 1/1.2"CMOS | | Shutter | Global | | Resolution | 1920 × 1200 | | Frame Rate | 164 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 5.86 μm × 5.86 μm | | Pixel | 2.3MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 5-core white plug interface: 1 optocoupler isolated input, 1 optocoupler isolated output, and 1 configurable input/output without optocoupler isolation | | Lens Mount | C | | Power Supply | 5.0V/900mA, powered through USB3.0 interface (compliant with USB3.0 interface specifications) or +5.0V/1A DC power supply auxiliary power supply (through auxiliary communication interface) | | Power Consumption | ≈2.8W | | Product Dimensions | 35 mm × 35 mm × 31 mm (not including lens) | | Net Weight | 50g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+40℃ |
|
AB7300CU102E| Sensor | IMX252 | | Image Sensor | 1/1.8"CMOS | | Shutter | Global | | Resolution | 2048 × 1536 | | Frame Rate | 120 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 3 MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | BayerRG8/10/10Packed;BayerGB8/10/10Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | White Balance | Support | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 5-core white plug interface: 1 optocoupler isolated input, 1 optocoupler isolated output, and 1 configurable input/output without optocoupler isolation | | Lens Mount | C | | Power Supply | 5.0V/900mA, powered through USB3.0 interface (compliant with USB3.0 interface specifications) or +5.0V/1A DC power supply auxiliary power supply (through auxiliary communication interface) | | Power Consumption | ≈2.8W | | Product Dimensions | 35 mm × 35 mm × 31 mm (Not including lens) | | Net Weight | 50g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+40℃ |
|
AB7300MU102E| Sensor | IMX252 | | Image Sensor | 1/1.8"CMOS | | Shutter | Global | | Resolution | 2048 × 1536 | | Frame Rate | 120fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 3.2MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 5-core white plug interface: 1 optocoupler isolated input, 1 optocoupler isolated output, and 1 configurable input/output without optocoupler isolation | | Lens Mount | C | | Power Supply | 5.0V/900mA, powered through USB3.0 interface (compliant with USB3.0 interface specifications) or +5.0V/1A DC power supply auxiliary power supply (through auxiliary communication interface) | | Power Consumption | ≈2.8W | | Product Dimensions | 35mm × 35mm × 31mm (not including lens) | | Net Weight | 50g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+40℃ |
|
AB7A20MU102E| Sensor | IMX304 | | Image Sensor | 1.1" CMOS | | Shutter | Global | | Resolution | 4096 × 3000 | | Frame Rate | 23.4 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 12 MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 5-core white plug interface: 1 optocoupler isolated input, 1 optocoupler isolated output, and 1 configurable input/output without optocoupler isolation | | Lens Mount | C | | Power Supply | 5.0V/900mA, powered through USB3.0 interface (compliant with USB3.0 interface specifications) or +5.0V/1A DC power supply auxiliary power supply (through auxiliary communication interface) | | Power Consumption | ≈3.2W | | Product Dimensions | 35 mm × 35 mm × 31 mm (Not including lens) | | Net Weight | 50g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|