| Frame rate |
22fps (Bayer 8bit, Mono 8bit)
|
| Gain |
MANUAL: 0 to +24dB, AGC: 0 to +24dB
|
| Image buffer |
64M Byte
|
| Interface |
GigE Camera
|
| Lens mount |
C-mount
|
| Mass |
approx. 60g
|
| Pixel size |
3.45μm x 3.45μm
|
| Power consumption |
PoE: 3.6W max. / DC12V: 2.9W max.
|
| Power supply |
PoE / DC12V ±10%
|
| Resolution |
2,448(H) x 2,048(V)
|
| Sensitivity |
3,200 lx (F11, 1/22s)
|
| White balance |
Manual white-balance / One-push white-balance
|
| Aspect ratio |
6:05
|
| Black level |
-25% to +25%
|
| Color type |
Color Camera
|
| Conformity |
CE, FCC, RoHS, WEEE, GigE Vision, GenICam, IIDC2
|
| Electronic shutter method |
Global shutter
|
| Exposure time2 |
MANUAL: 1.08μs to 14.44μs (Short exposure mode ON), 32μs to 16s (Short exposure mode OFF) AE: 32μs ~ 1s Random Trigger Shutter: 32μs to 16s (Edge or Bulk mode), 200μs to Trigger width (Level mode)
|
| External dimension |
29(W) x 29(H) x 40(D) mm (Not including protruding parts)
|
| External trigger input |
Low: 0 to 0.5V, High: 3.3 to 24.0V High active / Low active, Pulse width: 200μs (minimum)
|
| Gamma / lut |
γ=1.0 to 0.45 / In 12bit, Out 12bit
|
| Image output format |
Bayer 8bit / Bayer 10bit / Bayer 12bit
|
| Image size |
2/3 type
|
| Imager |
CMOS image sensor
|
| Imager model |
IMX264LQR
|
| Interface3 |
Gigabit Ethernet IEEE802.3ab (1000BASE-T) conformity
|
| Minimum illuminance |
3 lx (F1.4, Gain: +24dB, Video level: 50%)
|
| On chip color filter |
RGB primary color mosaic-on-tip color filter
|
| Operation humidity |
10% to 90% (no condensation)
|
| Operation temperature |
0°C to 40°C (below 60°C on cabinet surface)
|
| Optical glass filter |
IR Cut Filter
|
| Pixels |
5M
|
| Random trigger shutter mode |
Edge / Level / Bulk (255 times)
|
| Random trigger shutter type |
External Trigger / Software Trigger
|
| Readout mode |
All pixel, Scalable, Binning, Decimation, Mirroring, Flip
|
| Scanning |
Progressive
|
| Scanning area |
8.45mm(H) x 7.07mm(V)
|
| Sequential shutter |
16 entries (max)
|
| Synchronization system |
Internal
|
